How to do a cove base

Here are some simple steps to do a cove base with a full flake effect.

*Remember that you only need to do 1 coat on the sides of your walls (cove base).

1. Do all your surface preparation, cleaning and taping. Get all your materials ready. Always refer to the complete user guide.

2. Apply the first coat of the desired color on your floor. Let dry.

3. Do the sides of your walls (epoxy+flakes). Let it dry and then clean up the extra flakes that fell on the floor.

4.Do your second coat of epoxy on your floor. Add your flakes. Let Dry.

5.Do your 1st coat of clear all over. Let Dry.

6.Do your second coat of clear all over.